Tom Scott
2 HN recommenders · recommended in 8 months, 2015–2025
2:58 · 6.8M views · Oct 6, 2014
Tom Scott explains why Britain historically has separate hot and cold taps rather than mixer taps, tracing it to how water was stored in tanks. He notes why the hot tap is not safe to drink from.
HN commenters treat it as the standard short answer whenever UK taps come up.
8 comments from Hacker News
Short video by Tom Scott on the subject for those interested. this video tldw; Older homes in the UK had a water storage tank in the roof space that fed the water heating tank. This couldn't be classified as drinking water so wasn't allowed to be combined with the safe mains water that fed the cold tap. These days modern houses mostly use combi-boilers with no storage tank, so mostly both hot and cold are drinkable and it's not an issue. But preferences still lean towards the separate taps.
It makes a lot of sense having them separate. Tom Scott explains this video Here in California showers and much other plumbing are required to have backflow valves so that hot and cold don't cross contaminate.
Hot water heaters frequently have sacrificial anode rods to prevent corrosion. The rods corrode over time and dissolve into the water. Lower cost aluminum rods have health concerns, not as much with magnesium rods. See also Tom Scott's video on Britain's history with separate hot and cold taps and why hot taps sometimes had unsanitary cold water tanks to supply them: this video
On the topic of mixer-taps in bathrooms, the UK typically has separate taps due to the way the water is stored, or used to be stored: this video I was pleased when I remodelled my bathroom there and installed a mixer. So much more convenient.
Mandatory Giphy: [LINK] Also mandatory explanation why UK historically has had 2 taps: this video Which in the end is understandable. It's outdated. What isn't understandable is having the light switch OUTSIDE of the friggin' restroom.